Sarmax Videos

The Sarmax Apache 7 Stain Machine from Total Finishing Solutions is perfect for applying stains and primers to any exterior or rough sawn boards and other substrates.  The Apache series machines coat all sides by flooding and brushing the penetrating stains into the substrate.  We then use adjustable air knives to blow any stain out of crevices that the brushes cannot hit.  Followed by a second set of wiper brushes to leave the perfect amount of stain behind.  Boards exit completely coated, saturated, and properly wiped.

Medium production flow-coating line with automatic chain loading and unloading stations. Ideal for the application of water base, oil base and solvent base coatings on sidings, cladding, decking, block-house components, boards and small beams. Easy to use, very low maintenance, simple to clean but above all with a very fast payback. Hundreds of happy customers are our best testimonials.

This line represents the highest level of automation for the finishing of claddings, sidings, picket fences and boards thanks to the automatic loading of the layers from the stack with a portal and vacuum gripping systems and the palletization system of the material at the exit from the oven. The operator is therefore only involved in the stack positioning and pallet collection phases at the end of the cycle.

Thanks to the gantry loader and unloader of planks, sidings, boards layer from stack and to stack, this flow-coating line for planks and sidings can run without human presence.

Stand alone Apache 7 with manual loading/downloading. Average output with 3 mts boards: 8 to 10 pieces per minute.

Fully automated flow-coating finishing line featuring a de-palletizer unit with suction bars, chains deck with infeeding conveyor, denibbing brusher SP on 4 sides, flow-coating machine Apache 7, vertical drying oven and piling and palletizing stations. No human presence is required to run the line.

The video shows one of the best-selling lines for finishing beams and components for the construction of wooden houses. It is a fully automatic line, with loading and unloading with transverse chains, the 3-sided sander Model Kiowa T and the impregnating machine for painting the beam on 4 sides Model Apache 15 Brush-Air.

The line features an automatic loading station with cross chains, a 3-sided sander Kiowa T with top and bottom chamfering cutter heads, a flow-coater Apache 15 Brush-Air and an automatic unloading station with cross chains.

One line two settings to coat any wooden piece related to housing and outbuildings. Big volume of claddings, sidings, fences and deckings are possible thanks to the vertical drying oven and the palletizer unit while machined heavy beams for roof can be processed thanks to the heavy duty loading and downloading units and Apache 15 Brush-Air with combined technology of brushes and high speed air blades.

The most complete fully automatic line for surface treatment on 4 sides including loading / unloading with 90° cross chains deck, sanding machine Kiowa Q, denibbing and structuring brusher Cheyenne 4F-400 I, flow-coater Apache 19 Brush-Air and IR curing oven.

Automatic finishing line with loading system, structuring on 3 sides with brushes, flow-coating, drying station with IR lamp and downloading system for wooden beams with maximum section 450 x 900 mm and maximum length 14000 mm.

The trough-feed flow-coating tunnel Q-BASE is the most efficient and flexible solution to apply primer, impregnant, fire-proof agent and water on window components. Thanks to the "on board" fan and a set of high-speed air blowers Q-BASE can achieve a state of art finishing with full and homogenous coverage of any workpiece parts including tenons, rebates and holes.

New automatic spray coating line for picket fences and sidings supplied and successfully installed in the USA. High automation and two vertical ovens for two layers application are the key factors of this installation.

The Sarmax wiring, texturing, sanding & denibbing brushers Model SP have been designed and manufactured using cutting-edge production technologies able to provide: strength, operating precision, reliability over the years.

Set of brushes and abrasive belt grain are selected depending on customer application and type of wood. More common materials for brushes are silicon carbide (tynex), metal, tissue, scotch-brite or sanding paper leaves.

The SP range offers a broad range of uses as furniture components, wooden houses construction elements, flooring, decking, MDF, plywood and WPC items.

The Sarmax SP model with 2 or more brushes with the so called "package for veneered panels" includes a certain number of specific upgrades such as the rectified and reinforced working table to assure both rigidity and planarity that are needed to brush very thin veneer foil applied on panels.

The popular Sarmax brushing centre for beams Mod.Cheyenne 3F-200 U equipped with 2 brushes on each side is here enriched by two cutter heads for top corners chamfering and two additional brushes for top corners structuring. The final output is a perfect copy of a hundred years beam carved and brushes by hands and by the passage of time.

No. 4 "combi" roller / pad sanding groups each one driven by powerful 20 kw motor, oscillation and blowing of the belts for total cleaning and greater durability and 4 automatically positioned cutters for chamfering the edges. Always at the top of beam processing.

The new revolutionary Kombypass KC600 for beams, boards, planks and sidings combines in one machine two functions: 

1) Sanding by pad and oscillating wide belt  

2) Denibbing and distressing with two large diameter brushes

The brushing machine Mod. PAN1300 - 3, equipped with 2 cylindrical brushes, 3 oscillating rotative sanding discs and feeding belt with vacum suction offer an impressive finishing on solid wood and veneered panels. Thanks to adjustable rotating speed by inverter on each unit the PAN 1300-3 is the perfect solution for sanding, denibbing and structuring.

The Cherokee modular line for finishing parquet planks is the ideal solution for the application of oils, waxes, stains and colouring products. It is composed by three different machines: 1) Structuring/Denibbing machine with three brushes 2) Coating machine with 2 rollers 3) Wiping/Polishing machine with 2 pads and 2 brushes.

Fibertech-M represents the only solution available on the market today that allows the fully automatic sanding of windows, frames, doors, kitchen doors and panels on each side of the product: front and rear crosspiece, upper side, vertical sides, internal and lowered parts. In addition, each measurement of the piece takes place in a totally automatic way thanks to the reading station with scanner and external sensors.

Sarmax introduces Fibertech-M 3 with a new configuration including 3 working units: vertical brushes, 3D brushes and 3 rotative discs. Thanks to the affordable price and the smart working units Fibertech M-3 represents the perfect sanding solution fo big joineries and medium size factories. Thanks to the 3D brushes with 30 mm penetration in fact the Fibertech-M 3 is not only a perfect equipment for windows, frames and sashes but for cabinet, kitchen doors, doors and pantographed panels too.

Get the highest level of denibbing - sanding and wiring on floor planks, claddings and sidings with working centre Fibertech-F. Thanks to the innovative and patented system of cross-cutting via rotary discs of the product fibers, ensures a perfect cut of the same, a result impossible to obtain with traditional systems. This system prevents lifting after the application of oil, laquer, coat, primers or other wood preservatives and coatings, almost always avoiding the intermediate sanding normally required with traditional sanding systems. Moreover thanks to the quick change from sanding discs to metal/tynex discs the switch to an impressive wiring finish is immediate.

Thanks to the new sanding center Fibertech-S 8 with automatic positioning of all working heads and feeding system according to the profile pre-set working program the calibration, intermediate sanding or manual sanding of the profiles are now completely or consistently removed from the working process. Big safe of time and up to 30% price reduction of your window costs.